Select Page

Category: Floor coatings

PPG AQUAPON WB EP epoxy coating meets multiple criteria for LEED credits

PPG announced yesterday that its PPG AQUAPON® WB EP waterborne epoxy coating, which has an ultra-low volatile organic compound (VOC) formulation (26g/L), is eligible to help building owners, architects and specifiers obtain LEED® points in several categories. Based on third-party reviews of its environmental life cycle impacts, PPG AQUAPON WB EP coating has received an environmental product declaration (EPD) for its use as a flooring coating.

Read More

FORTA Corporation expands family of products

FORTA Corporation announces EXTEND-PRO, which can be applied to concrete surfaces where additional finishing time would be desired during floating and troweling, and CURE-PRO, both a cure and seal for new concrete as well as a sealer for cured concrete.

Read More

INSTALL to present at World of Concrete 2020 and DOMOTEX USA 2020

INSTALL Executive Director John T. McGrath Jr. will present “Understanding & Choosing Reliable Concrete Polishing Training & Certification” at World of Concrete 2020. Southeastern Carpenters Regional Council Representative Daniel Hicks will discuss “Solutions to the Labor Crisis, Keys to Reliable Labor – Recruiting, Training and Retaining” at DOMOTEX USA 2020. Each presentation highlights major trends effecting the floorcovering installation industry. In addition, each will discuss key concepts influencing INSTALL’s growth and educational/training developments over the next several years.

Read More

Uniform Evaluation Service (UES) report verifies ResinDek® mezzanine flooring complies with International Building Codes (IBC) and International Residential Codes (IRC)

“Having documentation such as this report from an organization that is widely known and trusted by code officials saves time during the permitting process,” explained Scott McGill, Director of Engineering for Cornerstone Specialty Wood Products. “Our ResinDek engineered flooring product is still relatively new in the marketplace, meaning building officials may not be familiar with it. IAPMO’s UES Reports provide officials with a single document that details all the relevant testing data, as well as lists all the requirements for code acceptance—including for 1-, 1.5- and 2-hour UL fire-resistance rated assemblies.”

Read More

The Kennedy Center for the Performing Arts celebrates the opening of its first-ever expansion

As a “living memorial” for President John F. Kennedy, the Kennedy Center for the Performing Arts takes an active position among the great presidential monuments in Washington, D.C. Through public events and stimulating art, the Kennedy Center offers a place where the community can engage and interact with artists across the full spectrum of the creative process. The REACH expansion, designed by Steven Holl Architects, adds much-needed rehearsal, education, and a range of flexible indoor and outdoor spaces to allow the Kennedy Center to continue to play a leadership role in providing artistic, cultural, and enrichment opportunities.

Read More

October-November PRISM

PRISM November-December 2019

Architectural Coatings info

We would like to know the biggest challenge you face when looking for information on architectural coatings used on institutional and commercial structures. Click here

SPONSORED CONTENT

Architects design pavilion with red petal facade. Overlapping shingles are composed of Alucobond Spectra Red tiles featuring a Lumiflon FEVE fluoropolymer resin topcoat. Photo credit: Keith Panel Systems

Architects design pavilion with red petal facade. Overlapping shingles are composed of Alucobond Spectra Red tiles featuring a Lumiflon FEVE fluoropolymer resin topcoat. Photo credit: Keith Panel Systems

Guide to Green Building – Product of the Week

TGI®-Spacer M is a warm edge plastic hybrid stainless steel spacer which improves thermal performance and condensation resistance of an insulating glass unit. It also provides structural performance and IG seal durability. It allows for more glazing without taking an energy, comfort or indoor air quality penalty. 6 color choices are available, and can be used in bent glass and radius shapes. It reduces the overall fenestration u-value, which increases the energy efficiency for the lifecycle of the building. It received the Cradle to Cradle Institute’s Platinum Level Material Health Certificate. Find out more about how to specify at www.spectheedge.com

TGI®-Spacer M is a warm edge plastic hybrid stainless steel spacer which improves thermal performance and condensation resistance of an insulating glass unit. It also provides structural performance and IG seal durability. It allows for more glazing without taking an energy, comfort or indoor air quality penalty. 6 color choices are available, and can be used in bent glass and radius shapes. It reduces the overall fenestration u-value, which increases the energy efficiency for the lifecycle of the building. It received the Cradle to Cradle Institute’s Platinum Level Material Health Certificate. Find out more about how to specify at www.spectheedge.com

Subscribe to PRISM

PRISM March April

Cradle to Cradle Certified products

The Cradle to Cradle program certifies products based on five quality categories—material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. Click here to see a list of building supply & materials, as well as other products, that are Cradle to Cradle certified.

Archives

SiteLock